B5040 Vertical Slotting Machine

from /month

Specification	Unit	B5040
Max.ramslottinglength	mm	400
Rammoving frequency per minute	times/min	20-80
Ram tilt angle	°	0-8
Ramvertical adjustment distance	mm	315
Distance from cutter headto column surface	mm	600
Distancefrom ramlower end totablesurface	mm	690
Table Diameter	mm	630
Table longitudinal travel	mm	620
Table cross travel	mm	560
Tablerotation angle	°	360
Table feed range (longitudinal and cross)	mm	0.08-1.21
Table rotary feed range	mm	0.052-0.783
Main motorpower	kw	4
Rapid traverse motor power	r/min	-
Machineweight	kg	3700
Overalldimension	mm	2290x1525x2485

This machine be used for interpolation plane, forming surface and Keyway Etc.And can insert the inclination in the 10° Mold and other within the scope of etc. work matter.
Enterprise suitable for single or small batch production.

The working table of the machine tool is provided with three different directions of feed (longitudinal, horizontal and rotary), therefore work object go through once clamping,Several surfaces in the machine tool machining
Hydraulic transmission mechanism with sliding pillow reciprocating motion and hydraulic feed device for working table.
The sliding pillow has the same speed in every stroke, and the movement speed of the ram and the working table can be adjusted continuously.
Hydraulic control table have ram commutation oil for oil reversing mechanism,In addition to hydraulic and manual feed outer,Even there single motor drive vertical, horizontal and rotary fast moving.
Use hydraulic feed the slotting machine,Is when the work is over turning back instantaneous feed,Therefore be better than mechanical slotting machine used drum wheel feed.