RM 500 Cylinder Boring and Milling Machine is designed to provide you grater work possibility. You might bore very large engine blocks practically with this machine RM 500 Boring machine is a high quality machine that will meet all necessities of greater workshops. Boring machine with vertical movement of the boring head. The boring head with variable feed speed might be controlled manually or automatically. The head returns to the preset position automatically after the end of the boring operation inside the cylinder. You can adjust speed of boring head with special motor control device between 0-600 rpm. You can abserve the speed (rpm) that you placed on the boring head allows an easy centering inside the cylinder to be worked. The table performs transverse movement automatically during the process of surface milling. You can abserve the ampere that the machine uses at digital display on teh control panel.The left /right speed movement of the machine table can be adjusted electrically. When milling, you can adjust the table as variable speed. Also you can adjust the boring head’s down movement electronically.
As a equipment we added the machine boring head changer robot handle.
With this handle, one operator can change boring head easily.
Underneath the transmission it is closed with a steel blower. And on top of it closes with an automatic cloth curtain. So all the slides are closed automatically.
On the table apart from the automatic surface milling movement, there is no need to pull the table to left or right by hand because there are electrical fast speed movement buttons. Through these buttons you can move the table faster without using the hand wheel. This feature doesn’t exist on other machines.
Also, while surface milling, you can adjust the movement speed on table automatic as you wish.
No other machinery have boring head changer robot. One operator can change the boring heads automatically.
