RM 320-CNC Boring Machine is designed to provide you with greater work possibilities. You might bore very large engine blocks practically with this machine RM 320 Boring machine is a high quality machine that will meet all necessities or greater workshops. Boring machine with vertical movement of the boring head. The boring head with variable feed speed might be controlled manually or automatically. The head returns to the preset position automatically after the end of the boring operation inside the cylinder. You can adjust the speed of the boring head with a special motor control device between 0-900 rpm. You can observe the speed (rpm) that you placed on the boring head allows an easy centering inside the cylinder to be worked. The table performs transverse movement automatically during the process of surface milling. You can observe the ampere that the machine uses on a digital display on the control panel you can traverse table speed on the control panel too. The left /right speed movement of the machine table can be adjusted electrically. When milling, you can adjust the table at a variable speed. Also, you can adjust the boring head’s down movement electronically.
As new equipment, we added the machine boring head changer robot handle.
With this handle, one operator can change the boring head easily. Chip breakers, tools, oil feeder, and Allen key that is needed come with the machine.
Underneath the transmission, it is closed with a steel blower. And on top of it closes with an automatic cloth curtain. So all the slides are closed automatically.
On the table apart from the automatic surface milling movement, there is no need to pull the table to the left or right by hand because there are electrical fast-speed movement buttons. Through these buttons, you can move the table faster without using the hand wheel. This feature doesn’t exist on other machines.
Also, while surface milling, you can adjust the movement speed on the table automatically as you wish.
No other machinery has a boring head changer robot. One operator can change the boring heads automatically.
