MACHINE SPECIFICATIONS
- Main Bearing Bore Diameter Range: 46 – 178 mm (1.800 – 7.000 in) Special tooling required for 127 – 178 mm (5.000 to 7.000 in)
- Capacity: V blocks, both 90 and 60; overhead and L-head in-line blocks; up to 1140 mm (45 in) long, 710 mm (28 in) from head deck to main bearing centerline.
FEATURES & BENEFITS
- Minimum stock removal, usually less than .003″ (.076 mm) off the caps compared to as much as .010″ (.254 mm) with boring
- Maximum precision, corrects distortion caused by warpage and cap stretch
- Meets or exceeds original factory accuracy for alignment, roundness and size
- Fast, easy setup
- Ease of operation, no special training required
- Profitable: Make $90-$120 in 30 minutes on a typical V-8 block
- Lifetime application service with every machine purchase
