In order to prevent the vibration and much noise of teh honing machine, the transmission is produced of high quality cast-iron. The hydraulic equipment of the machine is completely replaced in the transmission. There is no visible hydraulic pipe on the exterior surface of the machine Coolant unit is accommodated in the base of the machine. The transmission travel is upside and downward. You might adjust the hydraulic feed speed during the honing process. So, you may obtain any design you require inside the cylinder. You might stop the work of the machine whenever you want immediately via a special brake system.
HM 400 / Hydraulic Cylinder Honing Machine
MSRP $30 400
MACHINE description
| Model | HM 400 |
|---|---|
| Manufacturer | POLEKS |
| Max. Honing Capacity , mm | 260 |
| Min. Honing Capacity , mm | 25 |
| Stroke bore deepness, mm | 400 |
| Honing spindle speed, rpm | 40×80 |
| Spindle stroke speed , m/dk/min | 0.18 |
| Table surface, mm | 1500х600 |
| Table travel, mm | 1000 |
| Min. Distance between pindle and table, mm | 250 |
| Max. Distance between pindle and table, mm | 1300 |
| Spindle motor power,Kw | 1.1 |
| Hydraulic motor power, Kw | 1.5 |
| Cooling unit motor power, Kw | 0.19 |
| Lifting and lowering of head motor power,Kw | 0.75 |
| Electric system ,V | 380-24 |
| Length of machine , mm | 3150 |
| Width of machine , mm | 1650 |
| Height of machine | 1300 |
| Weight of machine | 900 |
Equipment
Standard Equipments
Quantity
Parallels Supports
2
Parallels Supports
2
Cooling system
1
Hydraulic system
1
Hydraulic speed adjustment unit
1
Manual operation book
1
Universal clamp for V-blocks
add. equipment
Clamp for processing sleeves
add. equipment
Honing head
add. equipment
Related products
Ask a question to a specialist
